Homeโ€บArticlesโ€บSMK-37 custom firmware: every option for the M-VAVE SMKโ€ฆ
Articles

SMK-37 custom firmware: every option for the M-VAVE SMK-37 Pro and Elite

From M-VAVE’s own open firmware to grooveboxes, a sampled grand piano and a talking synth, here is every SMK-37 custom firmware worth knowing in November 2026.

Bernardo de Azevedo
Bernardo de Azevedo
ยท Updated
SMK-37 custom firmware: the M-VAVE SMK-37 Pro next to a Yamaha DX7

SMK-37 custom firmware went from zero to more than 20 options in about a month. The M-VAVE SMK-37 Pro, a 37-key controller with a DX7-style synth, shares its chip with the M-VAVE FM-1, and in October 2026 the FM-1’s community firmware started to arrive on the keyboard. M-VAVE then released its own open-source firmware for the Pro and the Elite.

This guide sorts every SMK-37 custom firmware we could verify into five groups: the official release, Baud Girl’s synth upgrade, the firmwares written for the keyboard from scratch, the FM-1 ports and other community builds. Version numbers reflect genkigenki’s catalogue in mid-November 2026, and they change often.

Why SMK-37 custom firmware exists

The SMK-37 runs on the same JieLi AC791N chip as the FM-1, with the same second-stage bootloader, update loader and chip key. The developer genkigenki documented this and found that only the panel wiring differs. Porting an FM-1 firmware therefore means replacing the board layer, the code that reads the keys, pads, knobs and faders and drives the screen and LEDs, while the sound engine stays untouched.

genkigenki published a port kit, fm1-to-smk37, and a website that installs firmware from Chrome or Edge over USB. Most SMK-37 custom firmware is installed from that page. Memory is tight, so only one firmware runs at a time; switching means flashing another one.

Official: SMK37 OPEN

M-VAVE released SMK37 OPEN V01 for the SMK-37 Pro and Elite in October 2026. It turns the keyboard into an eight-track instrument with six engines (DX7 FM, 303, 808, PSG, plucked string and sampler), sequences of 16 to 64 steps, parameter locks and 16 project slots. A browser workbench at open.m-vave.com handles updates, projects, samples and DX7 voices.

It is the safest starting point, because it comes from the manufacturer and includes a restore option for the factory V016 firmware. Read our full article on SMK37 OPEN.

Synth upgrade: SMK-37+VA by Baud Girl

Baud Girl’s SMK-37+VA was the first SMK-37 custom firmware covered by the press, on 11 October 2026. It keeps the FM engine but adds a virtual analog engine with a seven-oscillator supersaw, an 8-bit engine with drums and sound effects, a list-based interface and a sequencer with ratchets, chance and song chaining. It supports the SMK-37 Pro, the Elite, the Donner Starrykey-37 Play and the EROK MKE-P37. Read our article on SMK-37+VA.

Written for the SMK-37 from scratch

genkigenki also wrote four firmwares designed around the keyboard rather than ported from the FM-1:

  • Makkuro37 (0.3): a microtonal drone synth with eight voices, 96 presets and several tuning sets.
  • Vector37 (0.3.2): an overtone synth in which the position of a moon on screen sets the mix of four planet sounds, with 32 factory sounds.
  • Speak37 (1.0): a talking synth in which each key speaks a word at its pitch, with a robot character that comments on your playing.
  • Erik37 (1.3): a sampled concert grand piano with velocity layers, pedal support and four rooms.

We cover all four in Makkuro37, Vector37, Speak37 and Erik37.

FM-1 ports for the SMK-37

This is the largest group of SMK-37 custom firmware. Each port keeps the original project’s sound and workflow and maps it to the keyboard’s keys, pads and faders.

FirmwareWhat it doesBased on
Snoop37Four-track looper grooveboxSLOOP by isod89
X0X909, 808, two 303s and a breakbeat playerX0X by Charles Vestal
FoMniOmnichord-style chord harp, pads as strum plateFoMni-1 by Charles Vestal
ORBITFour-track groovebox inspired by the OP-1ORBIT by dspaudio
MelodeeFour-track multi-engine synth and sequencerMelodee by keremimo
KetchTracker in the style of LSDJ and the M8Ketch by Adrien Risser-Zhuang
OberVaveEight-voice analog-style polysynthOberVave by zvenson
FMEL-1Mellotron M400 emulationFMEL-1 by AntonioAltea
FrodhesPhysically modelled electric pianoFrodhes by Leonardo Mirabal
ChoralRootChord instrumentChoralRoot by Quixotic7
PollyPocket arranger with eight General MIDI instrumentsPolly by Charles Vestal
DUB-1Generative dub techno machineDUB-1 by sbegueria
AMB-1, ZEN-1, MAKUGenerative and self-playing ambient machinesCharles Vestal, aceyprime, okumurari2
GHOULBOXDungeon-synth firmwareGHOULBOX by Jason Persinger
winampFMSLOOP-based groovebox with a Winamp 2.x lookwinampFM Synth by Hericdk
Rainbow modeMusic toy for children with color-coded notesFelucca fork by joshbartlettband-web

Several FM-1 authors also publish SMK-37 builds of their own projects, listed on genkigenki’s page: Skiff 2.1.1, ChoralRoot 0.29, FMEL-1 1.1, OberVave 3.3.2, FOMAJAM, Clipper Pro and Melodee nightly builds. For a closer look at the pattern-based options, see our comparison of SMK-37 groovebox firmware.

Other community SMK-37 custom firmware

A few developers publish their own SMK-37 builds outside the ports:

  • BB-37 by Big Beat Studio (TexasRADIO): a 101, a 303 and an 808 in one firmware.
  • SLOOP SMK-37 Multichannel by MiloMeowzers: SLOOP with six separate audio stems over USB.
  • Mewcoder by MiloMeowzers: a 20-channel vocoder built on SLOOP.
  • PP37 by Fabio Ribeiro: Erik37 with a recorded pad layer, tested on an SMK-37 Pro.

How to choose an SMK-37 custom firmware

The choice depends on what you want the keyboard to be:

  • A better FM synth: SMK-37+VA or SMK37 OPEN.
  • A groovebox: Snoop37, Skiff, ORBIT, SMK37 OPEN or X0X for drum machines.
  • A keyboard instrument: Erik37 for piano, Frodhes for electric piano, FMEL-1 for Mellotron, OberVave for analog-style pads.
  • Something unusual: Makkuro37, Vector37, Speak37 or the generative ambient machines.

Before installing anything, read our guide on how to install SMK-37 firmware safely. The keyboard’s flash holds its key calibration and Bluetooth pairings, and no download can replace them.

Quick answers about SMK-37 custom firmware

Is SMK-37 custom firmware free?

The firmwares listed here are free downloads. Most are released under open-source licenses such as GPL-3.0 or MPL-2.0, and some authors accept tips.

Can I run FM-1 firmware files on the SMK-37?

Not directly. genkigenki warns against using the FM-1’s factory files on an SMK-37. You need a build made for the keyboard.

Can I go back to the M-VAVE firmware?

Yes. genkigenki’s installer and M-VAVE’s workbench both include a way back to the stock firmware, which must be version V016.

Does SMK-37 custom firmware work on the Elite?

Many builds offer Pro, Elite and MKE-P37 versions, but several have only been tested on a Pro. Check each project’s notes.

Final perspective

A month after the first port, SMK-37 custom firmware already covers most of what the FM-1 scene offers, plus instruments that need real keys, such as a piano and a Mellotron. The catalogue is young and many builds are labelled experimental, so the best approach is to start with M-VAVE’s official release or a widely used port, back up the keyboard’s flash and explore from there.

Sources

Bernardo de Azevedo
Written by
Bernardo de AzevedoFounder & Editor

His connection with music began at age 6, in the 1980s, when his father introduced him to Jean-Michel Jarre's Rendez-Vous on vinyl. He works professionally in the legal field, while synthesizers became his space for abstraction and creative exploration. Founder of The Synth Source.