Homeโ€บArticlesโ€บSMK-37 groovebox firmware: SMK37 OPEN, Snoop37, Skiff, โ€ฆ
Articles

SMK-37 groovebox firmware: SMK37 OPEN, Snoop37, Skiff, ORBIT, X0X and Melodee compared

Pads as steps, faders as a mixer and 37 velocity keys: the M-VAVE SMK-37 makes a convincing groovebox. Here are the firmwares that turn it into one.

Bernardo de Azevedo
Bernardo de Azevedo
ยท Updated
SMK-37 groovebox firmware: the M-VAVE SMK-37 Pro next to a Roland MC-303 groovebox

An SMK-37 groovebox is the most common way the community reuses M-VAVE’s keyboard. The SMK-37 Pro and Elite have 16 RGB pads, four faders, eight encoders and 37 velocity-sensitive keys, and those controls map naturally onto step sequencing, track mixing and live playing. On the M-VAVE FM-1, the same grooveboxes had to share 27 silicone keys between notes and steps.

This comparison covers the SMK-37 groovebox firmwares available in November 2026, from M-VAVE’s official release to community ports. All of them install over USB from Chrome or Edge, and only one runs at a time.

The SMK-37 groovebox options at a glance

The video above shows Skiff 1.4 on the SMK-37 Pro, with the pads as a step grid and the faders as a mixer. The table summarizes the main options.

FirmwareTracksSoundOriginNotes
SMK37 OPEN8DX7 FM, 303, 808, PSG, plucked string, samplerM-VAVE (official)16 project slots, parameter locks
Snoop374SLOOP engines, looperPort of SLOOP by isod89Fader banks for level, filter, reverb, delay
Skiff6Synth tracks plus a user sample trackSkiff by illuminus5MIDI out with clock
ORBIT4Three synth parts and a drum machinePort of ORBIT by dspaudioInspired by the OP-1, tape arrangement
X0XDrum and bass machines909, 808, two 303s, breakbeat playerPort of X0X by Charles VestalReBirth-style workflow
Melodee4Multi-engine synth and sequencerPort of Melodee by keremimoNightly builds also available
BB-37Drum and bass machinesA 101, a 303 and an 808Big Beat Studio (TexasRADIO)GPL-3.0
KetchTrackerTracker in the style of LSDJ and the M8Port of Ketch by Adrien Risser-ZhuangVersion 0.1

SMK37 OPEN: the official SMK-37 groovebox

M-VAVE’s own firmware is the most complete groovebox and the safest to install. It offers eight tracks, six engines, sequences of 16 to 64 steps, arpeggiators, chords, parameter locks, effects and 16 project slots. Tracks can run in PROJECT or LIVE mode, and LIVE tracks keep playing when you switch projects. A browser workbench manages projects, samples and DX7 voices, and it can restore the factory firmware.

Its sampler has eight slots and about 19.55 seconds of storage. Read our full article on SMK37 OPEN.

Snoop37: SLOOP with the keyboard’s extras

Snoop37 is genkigenki’s port of SLOOP, the four-track looper groovebox originally written for the FM-1 by isod89. It is also the reference port in the fm1-to-smk37 kit, the one other developers follow. On the keyboard, Snoop37 adds velocity-sensitive keys, pads lit in the track colors, a pad-based sound picker, fader banks for level, filter, reverb and delay, and pitch and mod wheels.

Two community builds extend it: SLOOP SMK-37 Multichannel by MiloMeowzers sends six separate audio stems over USB, and Mewcoder adds a 20-channel vocoder. Our article on SLOOP for the FM-1 explains the original workflow.

Skiff: a six-track SMK-37 groovebox

Skiff is a free, GPL-3.0 firmware that turns the FM-1 into a six-track groovebox, and version 1.4 added the SMK-37 Pro. On the keyboard, the 16 pads act as a step grid, the four faders act as a mixer, the wheels send pitch bend and mod, and the pedal sends sustain. KNOB BANK works as SHIFT and FADER BANK cycles the fader functions. The TRS jack sends MIDI with clock.

The author is open about its limits. Only one sample slot is available, button LEDs are simply on or off, and the SMK-37 Pro build had been tested on a single unit when 1.4 came out. Elite and MKE-P37 builds had not yet been tried on a keyboard, and the Donner Starrykey-37 Play was not supported. Projects saved on an SMK-37 do not load on an FM-1, and vice versa.

ORBIT, X0X and Melodee

ORBIT is a four-track groovebox inspired by the Teenage Engineering OP-1. It combines three synthesizer parts with a drum machine and an event-based tape arrangement, and the SMK-37 port keeps its synth, drum, tape and mixer workflow.

X0X is Charles Vestal’s ReBirth-style machine with a 909, an 808, two 303s and a breakbeat player. It suits acid and techno sketches more than song arrangement.

Melodee by keremimo is a four-track multi-engine synth and sequencer. genkigenki ports version 1.4.5, and the author also publishes nightly SMK-37 builds.

BB-37 and Ketch

BB-37 by Big Beat Studio (TexasRADIO) combines a 101-style synth, a 303 and an 808 in one firmware, released under GPL-3.0. Ketch takes a different route: it is a tracker in the style of LSDJ and the Dirtywave M8, ported at version 0.1, for players who prefer typing patterns in columns to programming steps on pads.

Which SMK-37 groovebox should you choose?

  • Start with SMK37 OPEN if you want the official, documented option with a sampler and a recovery path.
  • Choose Snoop37 if you already know SLOOP or want multitrack USB audio through the multichannel build.
  • Choose Skiff if you want six tracks and MIDI clock out to drive other gear.
  • Choose X0X or BB-37 for classic Roland-style drum and bass machines.
  • Choose ORBIT or Melodee for synth-led song sketches.
  • Choose Ketch if you think in tracker columns.

Before switching between grooveboxes, back up your projects: firmware switching does not make data formats interchangeable. Our guide on how to install SMK-37 firmware safely covers backups and recovery.

Quick answers about the SMK-37 groovebox firmwares

Can I run two groovebox firmwares at once?

No. genkigenki explains that memory is tight, so only one firmware runs at a time. Switching means flashing another one.

Do SMK-37 groovebox firmwares sync to a DAW?

SMK37 OPEN supports MIDI Clock, Start, Continue, Stop and Song Position Pointer. Skiff sends MIDI with clock, and its clock options are internal or USB.

Can I use my FM-1 projects on the SMK-37?

Not in Skiff, whose author says projects do not move between the two devices. Check each firmware’s notes.

Which groovebox is best for live playing?

SMK37 OPEN’s LIVE tracks keep sounding across project changes, which is useful on stage. Skiff and Snoop37 make good use of the faders as a live mixer.

Final perspective

The SMK-37 groovebox scene shows why the keyboard is more than a copy of the FM-1 platform. Real pads and faders make step sequencing and mixing faster, and the keys make melodic parts easier to play in. With M-VAVE’s official firmware as a stable base and several mature community ports, an SMK-37 owner can try very different ways of making patterns on the same cheap keyboard.

Sources

Bernardo de Azevedo
Written by
Bernardo de AzevedoFounder & Editor

His connection with music began at age 6, in the 1980s, when his father introduced him to Jean-Michel Jarre's Rendez-Vous on vinyl. He works professionally in the legal field, while synthesizers became his space for abstraction and creative exploration. Founder of The Synth Source.