How to install SMK-37 firmware safely: V016, flash backups and recovery
Before you install SMK-37 firmware, update to V016 and back up the flash. Here is how the browser installers work and how to recover a keyboard that will not start.
Before you install SMK-37 firmware from the community, it helps to understand what is at stake. The M-VAVE SMK-37 Pro and Elite store their key and pad calibration and their Bluetooth pairings in the same 1 MiB flash chip that holds the firmware, and no download can replace that data. Installing is usually a one-minute job in a browser, but a careless write can leave a keyboard that plays every key as the same note.
This guide brings together the advice published by M-VAVE and by the main developers of SMK-37 firmware: genkigenki, whose installer hosts most ports, and illuminus5, author of Skiff. Always follow the specific instructions of the firmware you choose; this article is an overview, not a replacement for them.
Before you install SMK-37 firmware: update to V016
M-VAVE’s video shows the official route: the open-source workbench and its firmware flashing tutorial. Community installers work in a similar way, but they have one common requirement: the keyboard must already run M-VAVE’s stock firmware V016.
genkigenki’s installer says the first install needs V016, and that keyboards on V013 or V015 must be updated with M-VAVE’s M-UPGRADE tool first. Skiff’s guide gives the same rule and adds that its installers refuse older firmware. M-VAVE’s own repository dates the factory V016 package to 12 August 2026.
Back up the flash
The single most important step is a full backup of the keyboard’s flash. Two developers describe it slightly differently:
Skiff’s method: on Windows or Linux, with Python 3 and the jl-uboot-tool utility, read the full 1 MiB through the chip’s boot mode twice, in an administrator terminal. Both files must be 1,048,576 bytes and identical, and the text “trimdat” should appear at offset 0xC1224. Keep two private copies, because they contain data unique to your keyboard.
genkigenki’s advice: back up the current firmware with M-Flasher before using m-bootloader, a tool that adds a recovery menu and a download mode.
If Windows offers to format a disk called “WL82 UBOOT1.00” during this process, cancel. That disk is the chip’s boot mode, not storage.
How the browser installers work
Most SMK-37 firmware installs from a web page in Chrome or Edge over a USB cable, using the browser’s MIDI and SysEx access. In genkigenki’s installer, the steps are Connect, Verify, Update mode, Write, Restart and Done, and the whole process takes about a minute. Skiff’s installer takes about two minutes. M-VAVE’s workbench at open.m-vave.com installs SMK37 OPEN and asks you to confirm the physical model.
Three rules apply to all of them:
Pick the right model. genkigenki’s page lets you choose SMK-37 Pro, SMK-37 Elite or MKE-P37, and M-VAVE says Pro and Elite files are model-specific. genkigenki suggests the Pro setting for the Donner Starrykey-37 Play, while Skiff does not support that model yet.
Keep power and USB connected until the installer says it has finished.
Never use FM-1 factory files on an SMK-37. genkigenki’s site warns against it explicitly.
If the install of SMK-37 firmware is interrupted
The installers are designed to resume. In genkigenki’s installer, reconnecting and pressing Connect continues the install where it stopped. Skiff shows UPDATE MODE on screen after a cut; reconnecting within two minutes lets the installer resume, and otherwise you run it again.
On Windows, Chrome or Edge can freeze at “switching to update mode”. genkigenki’s fix is to close the browser in Task Manager, reopen the page, press Connect and install again.
Recovering a keyboard that will not start
genkigenki’s page lists the common problems and their fixes:
Symptom
What to do
Firmware will not start
Hold OCTAVE− and OCTAVE+ for five seconds to enter update mode, then reinstall or return to the M-VAVE firmware
Every key reads “C” on the M-VAVE firmware
Run the Repair tool, which rebuilds the key mapping in about ten minutes and needs the V016 file
Wheels do not respond after Repair
Run the wheel calibration in M-VAVE’s settings once
A USB disk called “WL82 UBOOT1.00” appears
The chip is in download mode; the keyboard is not lost
Keyboard stuck in another firmware’s update mode
Power it off and on, or finish the update with that firmware’s own updater or M-UPGRADE
The Repair tool keeps your calibration, wheel settings and Bluetooth pairings. Keep the cable connected and the browser tab open until it says Done. If nothing works, genkigenki asks users to press Copy log in the install window and send it on GitHub. Skiff’s guide adds that a boot-mode disk that keeps reappearing means restoring the firmware area from your own backup, and that the protected ranges should never be written from anything else.
Returning to the M-VAVE firmware
Every major installer includes a way back. genkigenki’s page has a “Back to the M-Vave firmware” section, Skiff’s installer has a return option that keeps calibration and pairings, and M-VAVE’s workbench offers Restore factory V16. Firmware switching does not convert data, so export your projects, voices and samples first.
Quick answers about installing SMK-37 firmware
Can I brick the SMK-37 by installing custom firmware?
Developers describe several recovery paths, including an update mode reached with the OCTAVE buttons and the chip’s own download mode. The real risk is losing the calibration and pairing data, which is why a flash backup comes first.
Do I need a Windows PC to install SMK-37 firmware?
No. The browser installers run in Chrome or Edge on desktop systems, and Baud Girl’s SMK-37+VA installer also runs in Chrome on Android. The full flash backup described by Skiff needs Windows or Linux.
Which browser should I use?
Chrome or Edge. The installers rely on the browser’s MIDI and SysEx access.
Is installing SMK-37 firmware covered by the warranty?
The community firmwares are unofficial and installed at your own risk. M-VAVE’s own SMK37 OPEN is the manufacturer’s release.
Final perspective
The SMK-37 firmware scene is friendly to newcomers: one browser page, one cable and about a minute per install. The caution that matters is the one that takes the longest, updating to V016 and making a verified backup of the flash. With that copy in a safe place, trying a new SMK-37 custom firmware becomes a low-risk experiment.
His connection with music began at age 6, in the 1980s, when his father introduced him to Jean-Michel Jarre's Rendez-Vous on vinyl. He works professionally in the legal field, while synthesizers became his space for abstraction and creative exploration. Founder of The Synth Source.