Key scaling, velocity scaling and some modulation depths are described as approximate, and the documentation makes no promise of sample-exact agreement with a real DX7 or with Dexed. Formats the importer does not handle include Arturia .dx7x files, SF2 libraries, Baud Girl’s VA SysEx packs, OB-Xf presets and Surge patches. The FM portion of an FM-1+VA backup can be read.
The VA engine and what it is not
VA is a stacked-oscillator virtual-analog engine with five waveform choices (SAW, SQR, TRI, SIN and SYNC), a five-oscillator unison with detune, and a filter that switches between LP12, LP24, BP and HP with resonance and a drive stage before it. It allows four voices per track and ships with presets named SUPER SAW, SYNC LEAD and VA PAD. SAW and SQR are band-limited; the README concedes that the SYNC reset and high-pitched triangle waves can still alias.
The documentation is careful to say that VA is an independent implementation and not a port of the firmware described in our piece on BAUDGIRL FM-1+VA. Baud Girl’s own VA preset files are therefore not converted. The engine is best treated as a compact supersaw and sync voice that sits alongside the FM and string models.
Polyphony is modest. The new engines other than DX7 allow four voices per synth track, DX7 allows two, and the three synth tracks share a budget of eight voices, so large chords played on several tracks at once can cut off earlier notes, according to the README.
Sound slots and the web editor
Sound management is where SLOOP ALG spends much of its effort. The device has 32 user slots, U01 to U32, and the web editor can save the current sound into any of them, replace one slot at a time, or batch-replace a contiguous run of slots from an imported bank. Batch writing refuses ranges that do not fit, downloads a backup of the target slots first, and stops at the first failure without rolling back. Device sound names are limited to 12 printable ASCII characters.
A separate mechanism binds a user slot to a factory entry, so that choosing that factory sound on the device loads the replacement instead. A maximum of 32 such stand-ins can exist at once because they occupy the same user slots. JSON preset files can be imported from a file or from a direct HTTPS link up to 4 MiB, and the browser library is not guaranteed to survive a change of browser, address or cleared site data, so the README advises exporting backups.
ALG-05 also feeds a live output waveform to the edit pages of the device. It shows the mixed output of all tracks, not individual operators, and the README notes that LCD behaviour and refresh speed still need confirmation on real hardware.
SLOOP ALG compared with SLOOP and sloopDX
Against current SLOOP, the comparison has changed since the fork was taken. The upstream README at the time of writing lists version 2.8.4, twelve engines and 153 factory sounds. Its FM6 engine, a six-operator model from Dexed’s core that imports DX7 SysEx, arrived in 2.4, and physical-model and noise engines followed in 2.5.
SLOOP ALG says later upstream updates are not part of its firmware, so it lacks features introduced afterwards, such as parameter locks and micro timing from 2.4. It also leaves out the Bluetooth and USB audio functions of the official firmware and works over USB MIDI only.
On voice count, the upstream specification gives six voices for FM6 played alone, against two for the DX7 engine in ALG. What ALG offers instead is a different set of timbres: a dedicated additive engine, a five-oscillator VA engine and four string-model variants.
The other related project, sloopDX, takes the opposite approach. According to its README, it replaces SLOOP’s engines with a single DX7 voice from Dexed’s core, tested against Dexed, and builds FM drums from the same engine. SLOOP ALG keeps all nine original engines and adds to them. sloopDX is covered only briefly here.
Installing it, and the one-way format
The SLOOP ALG project provides a browser installer and a firmware file, with source in a zip archive. The README specifies a computer running Chrome or Edge, a USB data cable and a device that stays powered throughout, and it warns that installation replaces the existing firmware. The upstream SLOOP installer installs stock SLOOP and not ALG. It also recommends keeping the official firmware and the FM-1-transporter recovery tool at hand. Anyone considering it should read the project’s own warnings and our guide to installing custom firmware safely before flashing.
The most serious caution concerns data. ALG-05 reads user banks and projects from ALG-02 and ALG-03, but once it saves in its newer bank and project formats, the ALG-02 and ALG-03 firmware can no longer read them. Going back means restoring exported JSON and project backups, which should be made beforehand.
On testing, the Chinese text of the installer page states that the build passed computer tests and has not been verified on hardware. The README adds that RAM and static instruction-cost checks were run, but that worst-case processor load and real USB and audio behaviour could not be measured. No independent review of the firmware had turned up at the time of writing, and the community directory Awesome FM-1 lists it with only a short description.
Final perspective
SLOOP ALG is a narrow, ambitious, one-person project, and its value lies in its sound sources more than in anything around the sequencer. The string models and the additive engine are unusual on an instrument of this price, the DX7 engine with per-operator editing and bank import adds real FM depth to a groovebox, and the web editor handles slot replacement carefully.
The honest ledger is long: Chinese-language documentation, inconsistent preset counts, approximate DX7 behaviour, two-voice FM polyphony, a frozen upstream baseline and no confirmed hardware testing. For now it suits experimenters who keep backups and enjoy testing early firmware, while players who want a more mature groovebox are better served by current SLOOP, which its own README still labels a beta.
Sources
- shaw-core/Sloop_ALG02 (README, docs/DX7_PROVENANCE.md, docs/ENGINE_PARAMETER_AUDIT.md, docs/PRESET_SOURCES.md), GitHub
- SLOOP ALG installer page, shaw-core (GitHub Pages)
- isod89/sloop-fm1 (SLOOP README), GitHub
- zvenson/dxsloop (sloopDX README), GitHub
- Awesome FM-1, GitHub
- The Karplus-Strong Algorithm, CCRMA, Stanford University
- google/music-synthesizer-for-android, GitHub
- Yamaha DX7 Synthesizer patches, Yamaha Black Boxes