The ARP button plays one of four patterns based on a cycle of twelve pulses: Thumbs, Cascade, 3 over 2 and Interlock. The README ties the last to the way mbira players pair a lead part with an interlocking one. The chord comes from a chord key, from the held keys or from incoming MIDI notes.
Tuning is equal by default, with a just-intonation option that retunes each note to a pure ratio over the tonic and lowers a major third by about 14 cents. The Mbira scale keeps its own tuning, which the README says approximates a Shona Nyamaropa tuning; how closely it follows that tradition has not been checked.
Lineage and the Claude Code disclosure
FiMba-1 is the end of a short chain. Felucca, by Leo Kuroshita of Hügelton Instruments, supplies the platform: USB, storage, an update loader and a safe boot. Charles Vestal’s X0X adapted that platform for a second instrument, and his FoMni chord harp, covered with the other Vestal firmwares, is the tree from which FiMba-1 started as a fork. Baudgirl’s FM-1+VA is cited as a reference, and the idea of running firmware in the browser is credited to Groove OS. The FiMba-1 kalimba project states it is not affiliated with M-VAVE or any of those authors.
The README states that FiMba-1 was built in conversation with Claude, Anthropic’s model, in Claude Code. In its account, the person who requested it chose the instrument, controls and refinements, while the assistant wrote the code, tested it in a host simulator and the browser, and fixed problems. It lists examples: bodies that at first changed the sound by under 2.5 dB were rebuilt, and a reported vinyl-crackle was traced to three causes, including voices being cut when a thirteenth note arrived, and then measured as reduced roughly 10,000 times.
These are the README’s own account of the development, and the tests have not been independently rerun. The wider debate about this way of working is discussed in the site’s piece on vibe-coded firmware. It is notable here that the disclosure is explicit and accompanied by tests that check each material’s pitch to within a few cents and run for twenty minutes.
Installing a beta safely
The installer for the FiMba-1 kalimba is on the project’s page and works from Chrome or Edge with a direct USB data cable and MIDI SysEx permission. It takes about a minute, and the page must stay open while it runs. The README also names a rescue script for Macs and a separate stock-firmware restore using M-VAVE’s V15 file, which the page checks by SHA-256 before writing. Download that file before installing anything, read the project’s own warnings, and see the site’s safe install and recovery guide.
Safety measures are described in detail. The first 16 KiB of flash, holding the chip’s boot code and update mode, are never overwritten. After two failed starts the FM-1 enters a safe mode with USB active, and after four it enters the chip’s own update mode. The author also says the package is compared region by region against FoMni’s, with everything except the application byte-identical. Those statements come from the README, not from independent testing.
Strengths and limits
The release list shows ten pre-releases, all titled beta, from v0.1.0 to v0.6.1 between 8 and 13 October. The first three carry no notes beyond a standard description, but the others describe changes such as raising the voice count from 12 to 16, adding a light and dark theme, turning MIDI out off by default and a hold-SAVE reset.
The latest stops the reverb once its tail fades, to save CPU; the changelog puts the saving at about 24% to 15% on the FM-1 when nothing is playing. Treat those dates and numbers as a snapshot, since the release list shows no year.
The strengths of the FiMba-1 kalimba are a clear concept, documented physics and a safe-boot approach inherited from established firmware. Limits are equally visible. It is a single-instrument firmware, so it adds no general sound engine. Sixteen-note polyphony is adequate for a kalimba but not for sustained layering. The FiMba-1 kalimba project page does not name a licence, though the README states GPL-3.0-only, and the page also gives no version number.
No recordings, reviews or user comments had been located at the time of writing. The Firmware Hub lists it as a kalimba. The Synthtopia roundup of alternative firmware was posted on 4 October, before the first FiMba-1 release, so its silence is not informative. Nothing in the project’s documentation compares the model with a real instrument, so claims about realism should wait for ears rather than README text.
Final perspective
FiMba-1 is a well-documented beta that makes a small, specific promise: a kalimba, modelled rather than sampled. For an instrument with an inharmonic spectrum and a body that shapes the tone, a physical model is a sensible approach, and the author’s explanations make the engine easy to follow.
Whether the FiMba-1 kalimba sounds convincing is not something the text can settle, and the beta label rightly warns that things may change. Anyone interested in the FiMba-1 kalimba should try the browser version first, install only with the stock firmware saved and the recovery steps read, and judge the Worn and body settings by ear.
Sources
- FiMba-1, a thumb piano for the M-VAVE FM-1, jadamsowers
- jadamsowers/fm1-fimba, GitHub
- FiMba-1 releases, GitHub
- Felucca, GitHub (Hügelton Instruments)
- The Firmware Hub, The Firmware Hub
- Mbira, Wikipedia
- Alt Firmware Options For The M-Wave FM-1 Pocket Synthesizer, Synthtopia