The M-VAVE FM-1 comes with only the synth, a USB-C cable and a manual, so the essential FM-1 accessories are a 5 V USB-C power adapter, a 3.5 mm TRS-to-DIN MIDI adapter wired as Type A, decent headphones or a 3.5 mm audio cable for your mixer or interface, and a small protective case. If you plan to play it seriously, add a velocity-sensitive MIDI keyboard. Everything else is optional.
Table of Contents
Essential FM-1 accessories: quick checklist
| Accessory | Why you need it | Priority |
|---|---|---|
| USB-C power adapter (5 V) | Charging and powering at a desk; none in the box | Essential |
| Spare USB-C data cable | Firmware updates, patch loading, USB audio | Essential |
| TRS Type A to 5-pin DIN MIDI adapter | Connect DIN MIDI keyboards and sequencers | Essential if you use DIN gear |
| Headphones | Better monitoring than the small speaker | Essential |
| 3.5 mm stereo to dual 1/4″ (or 3.5 mm) cable | Into a mixer or audio interface | Recommended |
| Protective case or pouch | Protect the knobs and screen in a bag | Recommended |
| MIDI keyboard controller | Velocity, more keys, wheels | Recommended |
| USB hub or MIDI host | Connect USB-only controllers without a computer | Optional |
| Power bank | Long sessions away from mains | Optional |
| External effects | Better reverb and delay than the built-in ones | Optional |
FM-1 accessories for power: a USB-C charger and cable
The FM-1 charges and runs from USB-C and has a 2,000 mAh battery rated at around 12 hours. Any reputable 5 V USB phone charger works. Use a good-quality data cable, not a charge-only one, because the same port handles firmware updates, DX7 bank transfers, MIDI and audio. A power bank is a cheap way to extend battery life on the road.
FM-1 accessories for MIDI: get a Type A adapter
The FM-1’s 3.5 mm MIDI input is wired to the Type A standard and no adapter is included. Buy a TRS Type A to 5-pin DIN female adapter to connect keyboards, sequencers or wind controllers with DIN MIDI out. Avoid Type B adapters; at least one owner thought their FM-1’s MIDI input was broken when the problem was the wrong adapter type. If your controller has a TRS MIDI out, a TRS-to-TRS cable works too.
Remember that the FM-1’s USB port is not a host: a USB-only MIDI keyboard cannot be plugged straight in. You will need a computer, a tablet or a small USB MIDI host box in between. Our FM-1 MIDI guide explains the options.
FM-1 accessories for audio: headphones and cables
The built-in speaker is handy but tiny. Use closed-back headphones for practice. For recording, either use the FM-1’s USB audio (it appears as an audio input on computers and phones) or run its 3.5 mm output into an interface with a 3.5 mm stereo to dual 1/4-inch cable. Note that at launch the output carried a mono signal on both channels; firmware v16 introduced a shared stereo effects chain with panning.
A case
The FM-1 is small enough for a coat pocket, but its knobs and screen are exposed. A padded pouch for small electronics or a hard case sized for compact grooveboxes keeps it safe in a bag. Owners have also discussed 3D-printed front plates and covers; check maker communities if you want something custom.


